NAIL DRILL

                Professional Desktop Charging Nail Drill

                                           Model: TP322     Brushless

FEATURES:

1,Smooth/ quiet / vibration free Brushless handpiece;

2,Powerful and strong 3,5000 RPM with LCD speed display;

3,Forward / Reverse switch and Pause function;

4,Battery full recharge time: 2.5 hours, Continuous use time: 12 hours;

5,Illuminated power indicator;

6,Holster doubles as a dock for handpiece or a belt clip for pedicure service;

7,Battery Capacity: 7.4V / 2600 mAH

8,Drill bits holder for more convenient use

PRECAUTION:

Below Safety instructions must be read to avoid potential hazards that could result in personal injuries or damage to the unit.

1, Install the control in the room at suitable temperature (0-40°C). Using it in an excessively dusty warm of humid location damages to the control.

2,When taking your Control Unit from the box, never let it fall on the floor.

3,Take care not to drop the handpiece. It will damage Ball Bearing or weaken durability of the handpiece.

4,Never plug or unplug the Power Cord with wet hands to avoid electric shock.

5, Never use damaged electric cable to avoid electric shock.

6,Do not insert too many power cords into one socket . It gives rise to fire.

7,Be sure not to disassemble or alter the units.

8, Never allow water or other liquids to spill onto and into the control unit and the micro motor , may cause short- circuit , abnormal heating or others by rusting of metal parts.

9, Turn off the unit and report the dealers you purchased from when such as found liquid leak from deformation , or some discoloration of the control unit.

10, Use only in the beauty care ( nail art / pedicure ) by an authorized personnel.

11, Do not use or leave the unit in ahigh heat environment such as a direct sun , in a parked near fire or stove.

12, Always check the unit for looseness , vibration , sound , operating the temperature. If abnormality is detected , immediately stop operation , and call the dealer.

13,Always put the Handpiece on its stand while in use .

14, The rated voltage is 110V / 220V. If the approved rated voltage is not used , the product may be troubled.

OPERATION PROCEDURE: 

1,For use Brushless Handpiece

a. To remove a bit , turn the Chuck Handle clockwise in the direction of the arrow until it clicks to stop and pull out the bit

b. To mount bit a bit, make sure that the chuck is in open position, insert a bit all the way the chuck , and turn the Chuck Handle clockwise in the opposite direction until if clicks to stop.

2, Operating of Motor

a. Connect DC Motor Cord to the jack marked as "MOTOR" (DC Motor Connect ) of the right place of the control unit.

b. Swtich ON/OFF the Speed Control Knob to start/stop the motor , and also adjust the handpiece speed.

c. Forward/ Reverse Direction( Button Marked as "F/R" ); The motor will pause when the button is in the middle place.

d. Motor speed can be varied between 0~35,000 RPM by Speed Control Knob.